Tractel Stopfor Rope Grabs

Features:

• Park features
• Gravity roller
• Rotating side plates
• Captive lock system

Specifications:

• Material:
  • Steel with a zinc-dichromate finish
  • 15/16 diameter hole
• Capacity:
  • 310 pounds

Warning:

Use only 5/8 inch (16 mm) Tractel specified three-strand lifeline.

Complies With:

• ANSI Z359.1-2007
• ANSI A10.32-04
• OSHA 1926
• New York DSA approval 9939
• CSA Z259.2.1-1998

The Tractel Stopfor B trailing rope grab is specially designed to be incorporated in a fall arrest or travel restraint system where worker mobility and fall protection is required. This innovative fall arrester is developed around the roll-over cam braking principle where in the event of a fall, the unit rotates to exert pressure on the cam axle to effectively stop the fall. This is accompanied by the introduction of friction via a bend within the lifeline. This ingenuity in design introduces a fall deceleration distance that is exceptionally smooth, controlled, and low in force. The unit will function impeccably in a panic grab scenario.

The design of the Tractel Stopfor B offers impeccable auto travel in both ascent and descent mode. Because the device functions without a locking jaw, little damage to the lifeline is caused when dynamically loaded. The park feature allows the rope grab to remain in a selected position on the lifeline. Tractel recommends to use a lanyard with a maximum length of 3 ft. (0.9 m).